Town Car V8-281 4.6L SOHC (1991)
Fuel Supply Line: Service and Repair
SPRING LOCK COUPLING
Fuel Line Couplings
REMOVAL
1.
Relieve fuel system pressure, refer to MAINTENANCE PROCEDURES/FUEL SYSTEM PRESSURE RELIEF.
2.
Disconnect the negative battery cable.
3.
Remove retaining clip from the spring-lock coupling by hand only. DO NOT use any sharp tool or screwdriver as it may damage the spring lock
coupling.
4.
Twist fitting to free it from any adhesion at the O-ring seals.
5.
Fit Spring-Lock Coupling Tool D87L-9280-A (3/8 inch) or D87L-9280B (1/2 inch) or equivalent to coupling.
6.
Close tool and push into open side of cage to expand garter spring and release female fitting.
7.
After garter spring is expanded, pull fittings apart.
