lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Relays and Modules - Restraint Systems > < Standby Power Supply, Air Bag|Locations|Page 5774
Page 1
background image

Malfunction Lamp / Indicator: Description and Operation

System Readiness Indicator Lamp

The system readiness indicator, located in the left pad of the electronic instrument cluster will light for approximately six seconds whenever the
ignition switch is turned from OFF to RUN if the air bag is working properly. If air bag system faults are found, the lamp will either fail to light, stay
on continuously, or light in a flashing mode (if a system fault exists and the lamp is malfunctioning an audible tone will be heard indicating the need
for service). If a fault occurs after the prove out the lamp will light either continuously or in a coded flashing mode.

Tone Generator

The air bag readiness lamp is the prime means of determining the air bag system condition. However, a series of five sets of five tones will be heard if
the readiness lamp is out and a fault occurs in the system. This also means that the Supplemental Air Bag System is in need of service. The tone
pattern will repeat periodically until the fault and lamp outage are serviced. Unless serviced, the Supplemental Air Bag Restraint System may not
function properly in the event of an accident.

Relays and Modules - Restraint Systems > < Standby Power Supply, Air Bag|Locations|Page 5774