Town Car V8-302 5.0L (1987)
Fig. 3 Engine mounts. 1982-83 Mark VI & 1982-88 Town Car V8-302
EXC. 1988 CONTINENTAL
Whenever self-locking mounting bolts and nuts are removed, they must be replaced with new self-locking bolts and nuts.
1.
Remove fan shroud attaching screws, if necessary.
2.
Remove the nut and through bolt attaching the insulator to the support bracket, Figs. 1, 2 and 3.
3.
Raise the engine slightly with a jack and a wood block placed under the oil pan.
4.
Remove the engine insulator assembly to cylinder block attaching bolts. Remove the engine insulator assembly and the heat shield, if so equipped.
5.
Reverse procedure to install.
