lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Engine - No Start/Hard Start In Freezing Temperatures|Page 2906 > < Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up|Page 2901
Page 1
background image

Idle Speed Control Bypass Air (ISC-BPA) Valve: All Technical Service Bulletins
Engine - No Start/Hard Start In Freezing Temperatures

Article No. 
91-11-5

05/30/91

^

NO START/HARD START - 5.0L - BELOW FREEZING TEMPERATURES

^

STALLS - 5.0L - BELOW FREEZING TEMPERATURES

FORD:

1986-88 THUNDERBIRD 
1986-91 CROWN VICTORIA, MUSTANG

LINCOLN-MERCURY: 1986-88 COUGAR 

1986-90 TOWN CAR 
1986-91 GRAND MARQUIS

ISSUE:

Condensation may be drawn through the PCV hose that is connected to the throttle body above the idle bypass motor. The condensation may
drip and accumulate water on the ISC motor freezing the motor closed.

ACTION:

Reroute the PCV hose from the throttle body to the inlet side of the air cleaner. Refer to the following procedure for service details.

Figure 1

1.

Replace the nylon formed PCV tubing with 3/8" rubber fuel line (E1PZ-9324-A). Refer to Figure 1.

Engine - No Start/Hard Start In Freezing Temperatures|Page 2906 > < Engine - Hard Cold Starts/Hesitation/Stalls On Start-Up|Page 2901