Town Car V8-302 5.0L (1987)
Neutral Safety Switch: Service and Repair
CONTINENTAL & MARK VII WITH AOD TRANSMISSION
1.
Disconnect battery ground cable.
2.
Position transmission selector lever in ``Lo'' position.
3.
Raise and support vehicle, then working from underneath vehicle, disconnect electrical harness from switch by lifting harness straight up off
switch.
4.
Using tool T74P-77247-A or equivalent, remove neutral start switch and O-ring seal by positioning tool over the extension housing area to gain
access to switch.
5.
Reverse procedure to install. Torque switch to 7---10 ft. lbs. using tool mentioned above.
