Town Car V8-302 5.0L (1987)
Fig. 5 Borg Warner Traction-Lok exploded view
Borg-Warner Type
1.
Place case cap half in vise with cavity facing upward.
2.
Install cone and side gear in reverse order of removal, Fig. 5.
3.
Assemble remaining parts in proper order, Fig. 5.
4.
Install case flange half over top cone and side gear. Install and snug tighten two retaining bolts on either side of case.
5.
Place differential case in suitable vise, then tighten vise to overcome spring preload tension.
6.
Install remaining bolts and torque evenly to 34---39 ft. lbs. Case cap bolts and case thread holes must be clean and free of oil to assure proper
torque readings.
7.
Apply Loctite or equivalent to pinion lock bolt and install. Torque bolt to 15---30 ft. lbs.
