lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Window Seal > < Power Window Regulator - Counterbalance Spring
Page 2
background image

4.

With "Vicegrips" (or an equivalent tool) on the spring hook, carefully wind the spring to the retainer pin. Make sure that the spring is properly
seated below the pin shoulder.

WARNING:

THE SPRING MAY CAUSE INJURY IF NOT PROPERLY SEATED BELOW THE SHOULDER ON THE RETAINING PIN
BECAUSE THE SPRING COULD SLIP OFF THE PIN.

5.

Cycle the regulator making sure the spring coils constrict as the window glass travels down. This insures that the coil is in the proper position.

6.

Replace the regulator in the door per the Shop Manual instructions.

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES:

102000, 190000, 205000, 290000

Window Seal > < Power Window Regulator - Counterbalance Spring