Town Car V8-4.6L (2008)
19. Position the shifter lever in the PARK position.
20. Remove the restraint system diagnostic tools from the clockspring electrical connectors at the top of the steering column.
21. Connect the driver air bag module.
1
Connect the horn electrical connector.
2
NOTICE: The clockspring electrical connectors are unique and cannot be reversed when connected to the driver air bag module. Match the
electrical connector key to the keyway in the driver air bag module. Do not force the electrical connectors into the driver air bag module.
Connect the driver air bag module electrical connectors as noted during removal.
3
Install the driver air bag module electrical wiring into the driver air bag wiring clip.
22. NOTE: With the driver air bag module held as close to the steering wheel as possible, take up the slack in the wiring by gently tucking any excess
length into the pocket at the bottom of the steering wheel before rocking the driver air bag module into place.
Align the 4 driver air bag module locking pins to the openings in the steering wheel and position the driver air bag module in place.
