Town Car V8-4.6L (2008)
Memory Positioning Module: Service and Repair
DRIVER SEAT MODULE (DSM)
Removal and Installation
NOTE: Prior to the removal of the module, it is necessary to upload the module configuration information to a scan tool. This information needs to be
downloaded into the new module once installed.
1. NOTE:
-
A new driver seat module (DSM) is delivered in a manufacturing mode with a pre-set DTC of B2477 (Module Configuration Failure). This
DTC will clear when the module has been successfully configured during programmable module installation (PMI).
-
This step is only necessary if the DSM is being replaced.
Upload the module configuration information from the DSM.