Town Car V8-4.6L (2008)
2. Using the special tool, install the crankshaft pulley.
3. Install the bolt and washer. Tighten the bolt in 4 steps.
^
Step 1: Tighten to 120 Nm (89 lb-ft).
^
Step 2: Loosen the bolt one full turn.
^
Step 3: Tighten to 50 Nm (37 lb-ft).
^
Step 4: Tighten an additional 90 degrees.
4. Rotate the tensioner clockwise and install the accessory drive belt.