Town Car V8-4.6L (2008)
Blower Motor Switch: Service and Repair
BLOWER MOTOR SPEED CONTROL
Removal and Installation
1. Drain the engine cooling system.
2. Remove the 2 RH cowl grille screws.
3. Remove the RH cowl grille.
4. Disconnect the vapor management valve (VMV) electrical connector.
5. Remove the 3 VMV bracket nuts.
-
To install, tighten to 6 Nm (53 lb-in).
6. Disconnect the 2 VMV fittings.
7. Release the 2 heater outlet hose clamps and remove the heater outlet hose.
8. Release the heater core inlet clamp and disconnect the heater inlet hose from the heater core.