Town Car V8-4.6L (2008)
6. Connect the passenger seat side air bag module electrical connector, located at the lower rear the seat cushion pan.
7. Disconnect the passenger air bag module jumper harness from the passenger air bag module electrical connector on the vehicle wiring harness.
8. Separate the locking inserts and disconnect the 2 restraint system diagnostic tools from the passenger air bag module jumper harness electrical
connectors.
9. NOTICE:
-
The passenger air bag module jumper harness electrical connectors are unique and cannot be reversed when connected to the passenger air bag
module. Match the electrical connector key to the keyway in the passenger air bag module. Do not force the electrical connectors into the
passenger air bag module.
-
Care must be taken when connecting the passenger air bag module electrical connectors to prevent damage to the electrical connector terminals
and the passenger air bag module pins.
