Town Car V8-4.6L (2008)
1
Release the driver air bag module electrical wiring from the driver air bag wiring clip.
2
Squeeze the tabs and disconnect the driver air bag module electrical connector.
3
Squeeze the tabs and disconnect the driver air bag module electrical connector.
4
Disconnect the horn electrical connector.
5
Remove the driver air bag module.
17. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
18. Position the steering column to the full down position.
19. Remove the 2 instrument cluster finish panel screws.
20. Release the retainer on the instrument cluster finish panel LH side.
21. Release the RH side retainers and position aside the instrument cluster finish panel.