Town Car V8-4.6L (2008)
2. WARNING: Always tighten the child safety seat tether anchor/bolt to specification. Failure to follow this instruction may result in the
child's safety seat being incorrectly secured, which increases the risk of serious personal injury or death to the child in a sudden stop or
crash.
Remove the 2 bolts and slide the lower anchors and tethers for children out through the opening in the carpet.
-
To install, tighten to 18 Nm (159 lb-in).
-
For installation, make sure the lower anchors and tethers for children is accessible and the alignment tabs are inserted into the slots in the floor
pan sheet metal with the wire attachments at the top.
3. NOTE: Make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.
To install, reverse the removal procedure.
4. Check the active restraints for correct operation.
