Town Car V8-4.6L (2008)
Ride Height Sensor: Service and Repair
Suspension Height Sensor
Suspension Height Sensor
Suspension Height Sensor
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the suspension height sensor electrical connector.
3. Disconnect the suspension height sensor connecting link.
4. Remove the 2 height sensor bracket bolts and the height sensor.
^
To install, tighten to 25 Nm (18 lb-ft).
5. To install, reverse the removal procedure.
6. Adjust the height sensor.
