Town Car V8-4.6L (2008)
Suspension Control Module: Service and Repair
Air Suspension Module
Air Suspension Module
Removal and Installation
CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.
1. While pushing in on the 2 glove compartment door tabs, position the glove compartment downward.
2. Remove the air suspension module in the following sequence.
1
Disconnect the 2 electrical connectors.
2
Remove the 2 bolts and the air suspension module.
^
To install, tighten to 3 Nm (27 lb-in).
3. To install, reverse the removal procedure.