lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Antenna Lead In Cable|Page 7235 > < Antenna Lead In Cable
Page 2
background image

5. Disconnect the radio antenna lead in cable.

6. Remove the antenna lead in cable.

1

Remove the five clips.

2

Remove the antenna lead in cable.

INSTALLATION

1. To install, reverse the removal procedure.

Rear

REMOVAL

CAUTION:  The antenna lead in cable is not removable from the wiring harness. If the cable needs to be replaced, leave it in the wiring harness. Install
a new cable on top of the body main wiring harness and secure it with wire ties. Do not cut into the wiring harness to remove the existing antenna lead in
cable.

1. Disconnect the battery ground cable.
2. Remove the package tray trim panel.

Antenna Lead In Cable|Page 7235 > < Antenna Lead In Cable