Town Car V8-4.6L SOHC VIN W (1999)
Keyless Entry Transmitter: Service and Repair
Transmitter Programming
1. Cycle the ignition from OFF to RUN four times within three seconds. The locks will then lock and unlock, confirming program mode has been
entered.
2. Press any button on the transmitter to be programmed.
NOTE: When the first keyless entry remote transmitter is programmed, all other keyless entry remote transmitters are erased.
3. If additional keyless entry remote transmitters are to be programmed, repeat step 2 within 7.5 seconds.
4. To exit program mode, turn the ignition to START or wait 7.5 seconds.
