Town Car V8-4.6L SOHC VIN W (1999)
1. Use Silicone Gasket and Sealant F7AZ-19554-EA or equivalent meeting Ford specification WSE-M4G323-A4.
2. Use the Crankshaft Damper Replacer to install the crankshaft pulley.
3. Install the bolt and washer. Tighten the bolt in four steps.
-
Step 1: Tighten to 90 Nm (66 ft. lbs.).
-
Step 2: Loosen the bolt.
-
Step 3: Tighten to 47-53 Nm (34-39 ft. lbs.).
-
Step 4: Tighten an additional 85-90 degrees.
4. Install the drive belt.
5. Install the engine cooling fan and the fan shroud.
