Town Car V8-4.6L SOHC VIN W (1999)
13. NOTE:The valve cover harness retaining studs positions 2, and 3 retain the fuel charging wiring.
Disconnect the harness from the valve cover and position out of the way.
14. Remove the studs, the bolts and the valve cover.
Installation
1. Follow the removal procedure in reverse order.
Apply sealant in the locations shown; use Silicone Gasket and Sealant F7AZ-19554-EA or equivalent meeting Ford specification
WSE-M4G323-A4.
2. Tighten in the sequence shown.
