Town Car V8-4.6L SOHC VIN W (1999)
Intake Manifold: Service and Repair
Removal
1. Disconnect the battery ground cable.
2. Drain the engine cooling system.
3. Remove the air cleaner outlet tube.
4. Disconnect the fuel line.
5. Remove the wiper arm and pivot shaft.
6. Remove the drive belt.
7. Raise the vehicle on a hoist.
8. Disconnect the electrical connector at the crankshaft position sensor (CKP sensor).
9. Disconnect the electrical connector from the A/C compressor.
10. Remove the oil bypass filter.
