Town Car V8-4.6L SOHC VIN W (1999)
9. Pull the seal from the A/C compressor.
INSTALLATION
1. Clean the A/C compressor nose area.
CAUTION: To prevent refrigerant system contamination, do not allow dirt or other foreign materials to enter the A/C compressor.
2. Place the shaft seal on the Shaft Seal Protector. Lubricate the shaft seal and the Shaft Seal Protector with PAG refrigerant compressor oil
F7AZ-19589-DA or Motorcraft YN-12c or equivalent meeting Ford specification WSH-M1C231-B.
3. Position the shaft seal and the Shaft Seal Protector over the A/C compressor shaft.
4. Push the shaft seal onto the A/C compressor shaft with the Shaft Seal Replacer until seated.