Town Car V8-4.6L SOHC VIN W (1999)
25.
Screen shows "Install calibration label press TICK.
26.
Screen shows "Set ignition switch to ON"; turn ignition ON.
27.
Screen shows "At least 2 PATS keys are programmed. PATS initialization is not required"; press TICK.
28.
Screen shows "Set ignition switch to OFF"; turn ignition OFF. Disconnect WDS DLC cable from vehicle. Press the ICON at the bottom of the
screen with the blue car and folder above it to return back to delete sessions menu. Delete the session and return to main screen on WDS.
29.
PCM is now reprogrammed, start engine and confirm MIL light is off. Recheck for DTC's and confirm only P1000 is present.
30.
Verify repair.
