Town Car V8-4.6L SOHC VIN W (1999)
Spark Plug: Service and Repair
REMOVAL
1. Remove the ignition coil on plug.
2. Remove the spark plugs
NOTE: Use compressed air to remove any debris from the spark plug well before removing the spark plugs.
3. Inspect the spark plugs for a gap bridged.
^
Check for deposit build-up closing the gap between electrodes. Deposits are caused by oil or carbon fouling.
^
Clean the spark plug.
4. Inspect for oil fouling.
^
Check for wet, black deposits on the insulation shell bore electrodes, caused by excessive oil entering the combustion chamber through worn
rings and pistons, excessive valve-to-guide clearance or worn or loose bearings.
^
Correct the oil leak concern.
^
Install a new spark plug.