Town Car V8-4.6L SOHC VIN W (1999)
Multifunction Electronic Control Module: Service and Repair
Driver Seat Module
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damages may result.
2. Remove the driver seat.
3. Remove the Driver Seat Module (DSM).
1
Disconnect the electrical connectors.
2
Remove the screws.
3
Remove the module.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
