Town Car V8-4.6L SOHC VIN W (1999)
1. Position and install the air bag sliding contact.
1
Install the air bag sliding contact on the steering column.
2
Make sure the retaining clips are engaged.
2. Connect the air bag sliding contact electrical connectors.
1
Connect the air bag sliding contact electrical connectors and install into the wire connector bracket.
2
Install the wires into the wiring harness retainer.
3
Install a new tie strap.
3. Install the key-in-ignition warning indicator switch.
4. Install the Passive Anti-Theft System (PATS) transmitter.
1
Position the PATS transmitter.
2
Install the PATS transmitter retaining screw.
