Town Car V8-4.6L SOHC VIN W (1999)
5. Use a hammer to lightly tap the installation tool provided in the D-Ring Installation Kit several times to seat the insert keys.
NOTE: If the two bolts on the height adjuster are not stripped. If the bolts are stripped, replace the height adjuster.
6. Insert the shoulder safety belt height adjuster in the opening of the upper B-pillar structure, making sure the shoulder belt height adjuster knob on
the shoulder safety belt height adjuster is positioned above the D-ring attachment nut. (The tab is located at the top and is to be inserted in the hole
provided in the B-pillar structure).
NOTE: If the two Torx(R) head retaining bolts on the shoulder safety belt height adjuster are not stripped, install the shoulder safety belt height
adjuster to the body structure as stated in this step. If the front seat shoulder strap adjuster retaining bolts are stripped, replace the shoulder safety
belt height adjuster and install it to the body structure.
7. Hand tighten the bolts until they are snug.
8. Tighten the bolts.
9. Install the B-pillar trim.
