Town Car V8-4.6L SOHC VIN W (1999)
Seat Belt Retractor: Description and Operation
WARNING: Rear-facing infant seats should never be placed in the front seats.
The dual locking mode retractor on the shoulder belt portion of the combination lap/shoulder safety belt for the front seat passenger, rear seat outboard
passengers and rear center passenger operates in two ways:
1. In the vehicle-sensitive (emergency locking) mode, the shoulder belt retractor will allow the occupant freedom of movement, locking tight only on
hard braking, hard cornering or impacts of approximately 8 km/h (5 mph) or more. The front and rear outboard seat belt retractors can also be
made to lock by pulling/jerking on the belt.
2. In the automatic locking mode, the shoulder belt retractor will be automatically locked and remain locked when the combination lap/shoulder
safety belt is buckled and does not allow the occupant freedom of movement. This mode provides tight lap/shoulder belt fit on the occupant and on
a child safety seat or infant carrier installation restraint.
3. When the combination lap/shoulder belt is unbuckled and allowed to retract completely, the retractor will switch to the vehicle sensitive
(emergency locking) mode.
The automatic locking mode must be used when installing a child safety seat on the front passenger seat and rear outboard seats where dual locking
retractors are provided.
