Town Car V8-4.6L SOHC VIN W (1999)
Steering Angle Sensor: Service and Repair
Sensor Ring
REMOVAL
CAUTION: The steering column must be in the locked position, or the lower end of the column wired in such a way that the steering column does
not rotate, resulting in damage to the air bag sliding contact.
NOTE: Discard the upper intermediate shaft to steering column shaft bolt upon removal. Do not reuse; replace with new bolt.
1. Remove and discard the pinch bolt. Disconnect the lower steering column shaft from the steering column shaft.
2. Remove the shock absorber electronic steering sensor.
1
Disconnect the electrical connector.
2
Remove the screws.
3
Remove the shock absorber electronic steering sensor.