lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Control Arm|Front|Page 5990 > < Campaign - Rear Upper Control Arm Reinforcement|Page 5987
Page 1
background image

Control Arm: Service and Repair
Front

Lower

REMOVAL 

1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.

3. Remove the tie-rod end castle nut.

1

Remove the cotter pin.

2

Remove the nut.

4. Remove the tie-rod end from the front wheel spindle.

1

Install the Tie-Rod End Remover.

2

Remove the tie-rod end.

5. Remove the coil spring.

Control Arm|Front|Page 5990 > < Campaign - Rear Upper Control Arm Reinforcement|Page 5987