lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Suspension|Spindle > < Steering Angle Sensor|Sensor|Page 6040
Page 1
background image

Suspension Mode Switch: Service and Repair

REMOVAL 

WARNING: Before performing maintenance on any air suspension components, disconnect the power to the system by turning off the air
suspension switch located on the LH side of the luggage compartment to prevent vehicle damage or personal injury.
 

1. Turn the air suspension switch off.
2. Disconnect the battery ground cable.

3. Peel back the luggage compartment trim.

1

Remove the pushpins.

2

Peel back the luggage compartment trim.

4. Remove the air suspension switch.

1

From behind the quarter panel reinforcement, depress the clips.

2

Remove the air suspension switch.

5. Disconnect the electrical connector.

INSTALLATION 

1. NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive

strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

To install, reverse the removal procedure.

Suspension|Spindle > < Steering Angle Sensor|Sensor|Page 6040