Town Car V8-4.6L SOHC VIN W (1999)
5. NOTE: Replace shock absorbers individually as required. It is not necessary to replace in pairs.
NOTE: To assist in removing the upper attachment on shock absorbers, use a plastic dust tube and place an open end wrench on the hex stamped
into the dust tube's metal cap. For shock absorbers with a steel dust tube, simply grasp the tube to prevent stud rotation when loosening the
retaining nut.
Remove the shock absorber upper retaining nut, washer and insulator from the stud on the upper side of the frame.
6. Remove and discard the self-locking retaining nut. Disconnect the shock absorber lower stud from the mounting bracket on the rear axle assembly.
INSTALLATION
1. Follow the removal procedure in reverse order.