Town Car V8-4.6L SOHC VIN W (1999)
4. Remove the snap rings.
5. NOTE: If the bearing cup cannot be pressed all the way out, remove it with vise grips.
Remove the driveshaft slip yoke.
1. Position the driveshaft in the U-Joint Tool.
2. Press out a bearing cup.
3. Rotate the driveshaft 180 degrees.
4. Press on the spider to remove the bearing cup from the opposite side.
5. Remove the driveshaft slip yoke.
6. Remove the remaining bearing cups and the spider.
7. Remove the snap rings from the driveshaft centering socket yoke end.
8. NOTE: If the bearing cup cannot be pressed all the way out, remove it with vise grips.
Remove the driveshaft centering socket yoke.
1. Position the driveshaft in the U-Joint Tool.
2. Press out a bearing cup.
