Town Car V8-4.6L VIN V Flex Fuel (2006)
Part 2
Exploded View
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 2 rear bumper cover screws (1 each side).
3. Remove the 2 pin-type retainers (1 each side).
4. Remove the 2 rear bumper cover lower screws.
5. If equipped, disconnect the parking aid system harness electrical connector.
6. Remove the 4 pin-type retainers and the luggage compartment rear trim panel.
-
Disconnect the electrical connector.
7. Remove the push-on retainers and position the LH luggage compartment trim panel aside.
8. Remove the 3 rear bumper cover nuts from the LH side rear panel.
-
To install, tighten to 7 Nm (62 lb-in).
9. Remove the spare wheel trim cover and the spare wheel.
