Town Car V8-4.6L VIN V Flex Fuel (2006)
Front Fender Liner: Service and Repair
Fender Splash Shield - RH
FENDER SPLASH SHIELD - RH
Removal and Installation
1. Remove the battery.
2. Remove the windshield washer reservoir.
3. Remove the battery tray bolt.
-
To install, tighten to 12 Nm (9 lb-ft).
4. With the vehicle in NEUTRAL, position it on a hoist.
5. Remove the 2 bolts and the fender splash shield.
-
To install, tighten to 12 Nm (9 lb-ft).
6. To install, reverse the removal procedure.