Town Car V8-4.6L VIN V Flex Fuel (2006)
8. When assembled, make sure the outboard track, support straps, front and rear height adjustment gears and seat track motor assembly all fit flush
against each other.
-
Make sure the support straps and seat track motor assembly gear bushing alignment pins fit into the track openings.
9. CAUTION: Do not overtighten or damage will occur.
Install the 2 seat track motor assembly-to-seat track bolts.
-
Tighten to 12 Nm (9 lb-ft).
10. Install the bracket (if equipped) and 2 seat track motor assembly-to-seat track nuts.
-
Tighten to 14 Nm (10 lb-ft).
11. Install the outboard retainer clip.
