lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Seat Cushion|Removal and Installation|Page 8317 > < Seat Cushion|Removal and Installation|Page 8315
Page 2
background image

Part 2

Disassembly

WARNING:

-

Always wear safety glasses when repairing a supplemental restraint system (SRS) vehicle and when handling an air bag module. This will
reduce the risk of injury in the event of an accidental deployment.

-

After deployment, the air bag surface can contain deposits of sodium hydroxide, a product of the gas generant combustion that is
irritating to the skin. Wash your hands with soap and water afterwards.

-

Never probe the connectors on the air bag module. Doing so can result in air bag deployment, which can result in personal injury.

-

To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:

-

If a seat equipped with a supplemental restraint system (SRS) component is being serviced, the SRS must be depowered.

-

The air bag warning lamp illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a supplemental restraint system (SRS) fault.

The heater mat on the front passenger seat cushion is not serviceable separately. If a new heater mat is needed on the front passenger seat cushion,
a new occupant classification sensor (OCS) service kit and a new heater mat must be installed.

Seat Cushion|Removal and Installation|Page 8317 > < Seat Cushion|Removal and Installation|Page 8315