Town Car V8-4.6L VIN V Flex Fuel (2006)
-
The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
All seats
1. Position the seat to gain access to the fasteners.
2. Depower the SRS.
3. Remove the affected seat.
Passenger seat with OCS
4. To disassemble a passenger seat cushion equipped with an OCS system, remove the OCS.
All seats
5. Remove the front seat backrest.
6. Remove the seat track.
Heated seats
7. Disconnect the heated seat electrical connector.
8. Remove the wiring harness connector. Note the wiring harness routing for installation.
All seats
9. Release the J-clips.
Seats with power lumbar
10. Disconnect the power lumbar switch electrical connector.
11. Insert a screwdriver between the bezel and the power lumbar switch. Pry the tab and push the switch through the bezel.
12. Remove the power lumbar switch.
All seats
13. Remove the seat cushion frame from the foam pad and trim cover.
