Town Car V8-4.6L VIN V Flex Fuel (2006)
3. Remove the brake pads and stainless steel slides from the brake caliper anchor plate.
4. Remove the guide pins and guide pin boots.
^
Check the guide pins for binding and damage.
^
Install new guide pins if worn or damaged.
5. CAUTION: Use the correct type and length bolts.
NOTE: When installing the brake caliper anchor plate, new brake caliper anchor plate bolts must be used.
Remove the 2 brake caliper anchor plate bolts and the brake caliper anchor plate.
^
Discard the bolts.
^
To install, tighten to 160 Nm (118 ft. lbs.).
6. To install, reverse the removal procedure.