Town Car V8-4.6L VIN V Flex Fuel (2006)
in unexpected inflation or deflation of the air springs, which can result in shifting of the vehicle during these operations. Failure to follow these
instructions may result in personal injury.
With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
3. Pull the parking brake adjuster clip downward.
4. Apply the parking brake control fully.
5. Push up on the parking brake adjuster clip to lock the adjuster.
6. Using the parking brake release handle, release the parking brake control.
7. Disconnect the front parking brake cable and conduit from the parking brake rear cable and conduit at the cable connector.
8. Press the retaining tabs, and remove the RH parking brake rear cable and conduit from the frame bracket.
9. Disconnect the LH parking brake rear cable and conduit retainer from the cable adjuster.
10. Remove the RH parking brake rear cable and conduit bolts.
^
To install, tighten to 15 Nm (11 ft. lbs.).
11. Disconnect the parking brake rear cable and conduit from the parking brake cable connector.
12. Unclip the parking brake rear cable and conduit from the axle housing.
13. Remove the parking brake rear cable and conduit.
14. To install, reverse the removal procedure.
^
Adjust the cable tension. For additional information, refer to Parking Brake Cable Adjustment.
