Town Car V8-4.6L VIN V Flex Fuel (2006)
6. Push up on the parking brake adjuster clip to lock the adjuster.
7. Using the parking brake release handle, release the parking brake control.
8. Disconnect the front parking brake cable and conduit from the cable union.
9. Unclip the scuff plate, the cowl side trim panel and remove.
10. Disconnect the parking brake release handle cable from the parking brake control.
11. Remove the screws and the instrument panel steering column cover with the parking brake release handle.
12. Remove the 5 instrument panel steering column opening cover reinforcement bolts and the reinforcement.
^
To install, tighten to 4 Nm (35 inch lbs.).
13. Loosen the powertrain control module (PCM) wiring connector bolt and disconnect the connector.
14. Loosen the bulkhead wiring connector bolt and disconnect the connector.
^
Position the bulkhead wiring connector out of the way for access.
^
Push the instrument panel (IP) side of the bulkhead wiring connector into the passenger compartment.
15. Remove the shake brace to parking brake control bolt.
