Town Car V8-4.6L VIN V Flex Fuel (2006)
Coolant Reservoir: Service and Repair
Degas Bottle
Degas Bottle
Removal and Installation
1. Drain the cooling system.
2. Disconnect the degas bottle overflow hose and supply hose.
3. Remove the bolt and the degas bottle.
^
To install, tighten to 10 Nm (89 inch lbs.).
4. NOTE: Do not reuse hose clamps. Instead, use appropriately sized worm-style clamps in place of the constant tension clamps.
To install, reverse the removal procedure.
5. Fill and bleed the cooling system.
