Town Car V8-4.6L VIN V Flex Fuel (2006)
4. Use the special tool to remove the crankshaft pulley.
Installation
1. NOTE: The crankshaft pulley must be installed within 4 minutes after applying the silicone.
Apply sealant to the Woodruff key slot on the crankshaft pulley.
2. Use the special tool to install the crankshaft pulley.
3. Install the bolt and washer. Tighten the bolt in 4 steps.
^
Step 1: Tighten to 90 Nm (66 ft. lbs.).
^
Step 2: Loosen the bolt.
^
Step 3: Tighten to 50 Nm (37 ft. lbs.).
