Town Car V8-4.6L VIN V Flex Fuel (2006)
4. Install the special tool.
5. Remove the oil filter and discard.
^
Lubricate the new oil filter 0-ring seal with clean engine oil prior to installation.
6. NOTE: LH shown, RH similar.
Remove the LH and RH lower engine mount nuts.
^
To install, tighten to 90 Nm (66 ft. lbs.).
7. Using the special tool, raise the engine.
8. Remove the 3 LH engine mount bolts.
^
To install, tighten to 70 Nm (52 ft. lbs.).
9. Remove the LH engine mount.
10. To install, reverse the removal procedure.