Town Car V8-4.6L VIN V Flex Fuel (2006)
2
Install the bolts and tighten to 10 Nm (89 inch lbs.).
3
Connect the electrical connector.
26. Install the RH cowl extension.
1
Install the RH cowl extension.
2
Install the pin-type retainers.
3
Install the nuts and bolts and tighten to 10 Nm (89 inch lbs.).
27. Install the wiper mounting arm and pivot shaft. For additional information, refer to Wiper and Washer Systems.
28. Connect the fuel spring lock coupling. For additional information, refer to Fuel Delivery and Air Induction.
29. Install the air cleaner and outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
30. Connect the battery ground cable. For additional information, refer to Battery.
31. Fill and bleed the engine cooling system. For additional information, refer to Cooling System.
