Town Car V8-4.6L VIN V Flex Fuel (2006)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Disconnect the negative battery cable. For additional information, refer to Battery.
3. Rotate the drive belt tensioner clockwise and remove the drive belt.
4. Disconnect the crankshaft position (CKP) sensor electrical connector.
5. Disconnect the A/C compressor electrical connector.
6. Remove the bolt from the transmission cooler tube bracket.
7. Remove the nut and position aside the transmission cooler tube assembly.
8. Remove the 3 bolts and position aside the A/C compressor.
9. Remove the catalytic converter-to-exhaust manifold nuts and position aside the catalytic converter flange.
10. Remove the 8 nuts, the exhaust manifold and the gasket.
^
Discard the gasket.
Installation
