Town Car V8-4.6L VIN V Flex Fuel (2006)
31. Connect the passenger air bag module jumper harness to the passenger air bag module electrical connector on the vehicle wiring harness.
32. Connect the battery ground cable.
33. Move the front seats to their highest and most forward position
Warning: To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or
replacing any front or side air bag supplemental restraint system (SRS) components and before servicing, replacing, adjusting or striking
components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood latches.
The 2 front impact severity sensors are located at the top and in front of each side of the radiator core support.
The side impact sensors (if equipped) are located at or near the base of the B-pillars.
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect auxiliary
batteries and power supplies (if equipped).
34. Disconnect the battery ground cable and wait at least one minute.
35. Disconnect the passenger seat side air bag module electrical connector, located at the lower rear of the seat cushion pan.
