Town Car V8-4.6L VIN V Flex Fuel (2006)
5. Measure the ride height D dimension.
1
Release the set screw.
2
Pull the sliding post and scale up until it touches the bottom of the inboard frame rail and lock the set screw.
3
Measure the ride height D dimension.
6. If ride height dimension D is not within specification, use the diagnostic tool to vent or fill the air suspension to the correct dimension.
7. Using the diagnostic tool, monitor the suspension height sensor voltage PID.
8. Loosen the height sensor bracket nuts.
9. Slide the bracket until the height sensor voltage PID is equal to 2.80 volts.
10. Tighten the height sensor bracket nuts to 11 Nm (8 ft. lbs.).
