Town Car V8-4.6L VIN V Flex Fuel (2006)
2. Place 4 flat washers over the outside end of the wheel stud, and thread a standard wheel nut with the flat side against the washers.
3. Tighten the wheel nut until the wheel stud head seats against the back side of the axle flange.
4. Remove the wheel nut and washers.
5. Position the brake disc and caliper and install the bolts.
^
Tighten to 27 Nm (20 ft. lbs.).
6. Turn the air suspension service switch to the ON position.
