lincoln Workshop Repair Guides

Lincoln Workshop Service and Repair Manuals

Module Communications Network|Page 3490 > < Module Communications Network|Page 3488
Page 7
background image

B4

Normal Operation

The instrument cluster communicates with the diagnostic tool through the controller area network (CAN) circuits, 1827 (WH/LG) and 1828 (PK/LG).
The instrument cluster also uses the standard corporate protocol (SCP) communications network, circuits 914 (TN/OG) and 915 (PK/LB) to
communicates with SCP network modules.

Check the CAN and SCP communications network circuits between the instrument cluster C220 and the data link connector (DLC) C251. The total
resistance values must not be more than 5 ohms. If the resistance is more than 5 ohms, there is an open in the CAN or SCP circuits, damage to the 
DLC C251, damage to the instrument cluster C220, or a problem in the in-line connectors.

Possible Causes

-

CAN data plus circuit 1827 (WH/LG) open

-

CAN data minus circuit 1828 (PK/LG) open

-

SCP data plus circuit 914 (TN/OG) open

-

SCP data minus circuit 915 (PK/LB) open

-

instrument cluster C220

-

instrument cluster

Test C: The Anti-Lock Brake System (ABS) Module Does Not Respond To The Diagnostic Tool

PINPOINT TEST C: THE ANTI-LOCK BRAKE SYSTEM (ABS) MODULE DOES NOT RESPOND TO THE DIAGNOSTIC TOOL

C1

Module Communications Network|Page 3490 > < Module Communications Network|Page 3488